JACK H5K Lockstitch

1-needle lockstitch machine with automatic functions and the right knife for cutting the edge of the material. Designed for sewing heavy materials (e.g. leather, upholstery materials, technical materials, etc.). The machine is equipped with a modern energy-saving motor built directly into the machine head (Direct Drive system). This solution guarantees quiet operation and low electricity consumption.
Double transport (bottom feed and top – walking foot) ensures perfect sliding of the upper and lower layers of sewn materials. This is especially useful when sewing multiple layers of fabric, when sewing wool upholstery, and when sewing through transverse seams and thickenings. The machine is equipped with a readable operating panel built into the head and LED illumination of the working field located at the needle bar (with the possibility of adjusting the light intensity).

The machine is equipped with a knife mechanism that cuts the edge of the material. It is possible to switch quickly between sewing without the trimmer.

Automatic functions: 

• lifting the presser foot
• thread cutting
• initial and final locking
• tuck bartacking
• sewing programming for square and pocket
• needle positioning

Technical parameters: 

• sewing speed: up to 2200 stitches / min
• stitch length: up to 8 mm
• trimming width: 3/16″ (4,8 mm)
• presser foot lift: up to 16 mm (manually 7,5 mm)
• needle system: DPx17
• power: 230V